DIY HOME WINDOW TINTING

Window film is a thin, multi-layered polyester material that
incorporates the many different layers to control different
properties, including Ultra-Violet (UV) light, heat, glare, and
privacy. Window film comes in a variety of performance
levels and shades.

The many benefits of window film include eye comfort,
UV protection, aesthetics, and increased safety, privacy,
and energy savings.

Film percentages stand for light transmission, or the
amount of light that is allowed through the film. The lower
the percentage, the darker the film.

No. In most cases, window film is installed on the inside of
the glass. This allows for maximum durability.

The moisture that remains between the film and the glass
after installation can cause a hazy, streaky, orange-peel
appearance. It takes several days for the adhesive/film
to completely cure. As the film is porous, the remaining
moisture will evaporate through the film; depending on
the type of film, this process may take a couple of days, or
even up to a month – depending on season and amount of
direct sunlight on your window. When the water evaporates
completely, your windows should have excellent clarity.

After window film installation, wait 30 days before cleaning
the inside of the window where the film was installed. Once
30 days has passed you can use a mild mix of dishwashing
liquid (ie. Morning Fresh) and water, and a soft cloth and
rubber squeegee. Never scrape the film with any type of
blade or clean your tinted windows with anything abrasive.
The film is scratch resistant, not scratch proof.

Damaged window film cannot be repaired, but the damaged
piece of film can be removed and the glass can be retinted.

No, window film does not prevent glass from breaking.
Window film does increase the safety of the glass; due to a
very aggressive adhesive, the film helps to hold the pieces of
broken glass together. In the event the glass breaks, due to
a person running into it, or an attempted break-in, the glass
will shatter, but in most instances, the film will help keep the
glass together.

Yes, there are specialised window films designed to hold
glass together in the case of an accidental breakage and
even attempted forceful entry. Standard window films also
offer increased safety and security by holding the glass
together in the case of a breakage.

Yes. The same sun that brightens a room’s interior can
be detrimental to fabrics, furnishings, artwork, and rugs.
Ultraviolet rays and visible light are the main causes of
both fade and deterioration. Window films can screen out
99% of the damaging UV rays that can fade richly coloured
furniture, flooring, and artwork. Heat and light also play
a part in fading, but using window film to block nearly 100%
of UV rays will increase the life of your personal property
for years.

Yes. Window films give a clear view to the outside.
Depending on the degree of privacy desired, you can select
films that prevent others from looking in during the daytime.

Yes. Glare not only can cause eye fatigue, but it can also
be dangerous while working at a computer. It reduces the
amount of light allowed through the film, therefore allowing
you to see better and not stress your eyes.

“One-Way Film” is based on lighting, not the film itself. The
side that is the brightest is the side that you can see. During
the day when it is bright outside, you can see outside. At
night, if you have lights on inside and no lighting outside,
then it reverses.

No. The adhesive is designed to adhere to glass only.
Window film should only be applied to glass surfaces that
have a smooth finish.